Although an out of order hard drive can be a great headache, luckily hard drive recovery in many cases may only require a few simple checks and you may well be on your way back to having a normally functioning hard drive. If unfortunately your hard drive stops functioning properly, first of all you need to remove it from your PC and then perform a thorough examination to rule out the possibility of any specific damage. Make sure that there are not any broken tiny parts on the hard drive. If the disk is physically intact, you may need to check the cables as the next step to full data recovery. Try replacing the power and data connection cables with new, working cables.
There is another thing you also need to try for hard drive recovery if you are using a PATA (IDE) drive. In many cases, changing the jumper pin settings of the drive may work e.g. if it was previously set to “slave” or “cable” change the settings to “master” and it might work for you. Moreover, besides changing the settings, remove any other devices that might be attached to the same port and plug the drive in that port alone.
Relieving RAID Logical Disk Issues
It is often very difficult to counter RAID logical disk issues. However, when this happens to your Dell PowerEdge server system, it is important to seek help right away. Some people attempt to fix the problem all by themselves and end up losing all the files eventually. Some people assume that Dell’s OpenManage Server Administrator (also known by its acronym OMSA) can help them when a drive fails within the array. Unfortunately, this is not the case. Using OMSA can often make recovering data from a Dell PowerEdge server more difficult than is necessary. This is the reason why it is necessary to simply turn off the computer when PowerEdge RAID array logical disk issues are experienced. From there, you have to consult an expert computer technician who can manage to fix your hard drive array. Usually, he will assess the condition first and conduct several tests on how severe your logical disk problem is. When he discovers the key defect, he will carefully to retrieve the files by fixing the hard drive step by step.
It can be a little time consuming to retrieve the files that are lost by a damaged logical disk. However, it is always possible to have it again as long as you seek help from the right person. As much as possible, you have to choose the best technician so that you can be assured of getting the appropriate services. Make sure that the RAID logical disk issues are fixed by a technician who has a good experience regarding this matter.
Hard Drive Repair After It Is Dead!
Hard drive failure is generally panic situation for most of us especially when we have precious data on it. Moreover, if the nature of damage is physical or related to hardware, the problem is even more severe and you may not be left with any option but to send your drive to professional hard drive repair service. Hard drive recovery completed by a professional is typically very safe, however, and more affordable than most people think. However, there are a few things that you can do on your own in an attempt to give life to your dead drive. You may still have a chance to repair it yourself by following a few simple and safe steps.
A device that doesn’t spin at all may have a damaged PCB in most cases. If you are using an older version of hard drive, dealing with a faulty PCB would be much easier (here is a guide). Simply replace it with a healthy PCB from another matching hard drive. However, if you have a newer hard drive, the solution will not be that simple. These devices have two fuses (TVS diodes) that provide protection to your device in case it faces a power fluctuation. Chances are that one of these fuses would have been damaged. Just replace that fuse or even remove it completely and try connecting again. However, if that doesn’t help in hard drive repair, you may need to replace the PCB. In new version of hard drives, the replacement of PCB can be done by replacing the ROM chip having the 8 pin code on it. These chips are fitted in the hard drives and should be replaced with a chip with matching code only. Hopefully, this drive repair process would work for you.